Phoenix Contact 3036369 ST 4-HESI (5X20) Series Black, 4mm², Single-Level, Spring Clamp Termination, Fused
Tehniskie dokumenti
Specifikācija
Brand
Phoenix ContactColour
Black
Number of Levels
Single
Series
ST 4-HESI (5X20)
American Wire Gauge
28 → 10AWG
Termination Method
Spring Clamp
Cable CSA
4mm²
Fused
Yes
Voltage Rating
500 V
Current Rating
6.3A
Pitch
6.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+85°C
Standards Met
cULus
Model Number
ST 4-HESI (5X20)
Izcelsmes valsts
Turkey
Produkta apraksts
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
€ 27,50
€ 5,50 Katrs (Paka ir 5) (bez PVN)
€ 33,28
€ 6,655 Katrs (Paka ir 5) (Ieskaitot PVN)
5
€ 27,50
€ 5,50 Katrs (Paka ir 5) (bez PVN)
€ 33,28
€ 6,655 Katrs (Paka ir 5) (Ieskaitot PVN)
5
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
Tehniskie dokumenti
Specifikācija
Brand
Phoenix ContactColour
Black
Number of Levels
Single
Series
ST 4-HESI (5X20)
American Wire Gauge
28 → 10AWG
Termination Method
Spring Clamp
Cable CSA
4mm²
Fused
Yes
Voltage Rating
500 V
Current Rating
6.3A
Pitch
6.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+85°C
Standards Met
cULus
Model Number
ST 4-HESI (5X20)
Izcelsmes valsts
Turkey
Produkta apraksts
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².