Texas Instruments TUSB4041IPAP, USB Hub, 4-Channel, 480Mbit/s, USB 2.0, 64-Pin HTQFP
Tehniskie dokumenti
Specifikācija
Brand
Texas InstrumentsNumber of Transceivers
4
Data Rate
480Mbit/s
Protocols Supported
USB 2.0
Power Supply Type
Dual
ESD protection
Yes
Typical Dual Supply Voltage
1.1 V, 3.3 V
Mounting Type
Surface Mount
Package Type
HTQFP
Pin Count
64
Dimensions
10.2 x 10.2 x 1.05mm
Height
1.05mm
Length
10.2mm
Maximum Operating Temperature
-40 → +85 °C
Width
10.2mm
Minimum Operating Temperature
-40 → +85 °C
Produkta apraksts
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
USB (Universal Serial Bus), Texas Instruments
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 6,20
Katrs (bez PVN)
€ 7,50
Katrs (Ieskaitot PVN)
1
€ 6,20
Katrs (bez PVN)
€ 7,50
Katrs (Ieskaitot PVN)
1
Pirkt iepakojumos
Daudzums | Vienības cena |
---|---|
1 - 9 | € 6,20 |
10 - 49 | € 5,30 |
50 - 249 | € 4,85 |
250 - 499 | € 4,15 |
500+ | € 3,80 |
Tehniskie dokumenti
Specifikācija
Brand
Texas InstrumentsNumber of Transceivers
4
Data Rate
480Mbit/s
Protocols Supported
USB 2.0
Power Supply Type
Dual
ESD protection
Yes
Typical Dual Supply Voltage
1.1 V, 3.3 V
Mounting Type
Surface Mount
Package Type
HTQFP
Pin Count
64
Dimensions
10.2 x 10.2 x 1.05mm
Height
1.05mm
Length
10.2mm
Maximum Operating Temperature
-40 → +85 °C
Width
10.2mm
Minimum Operating Temperature
-40 → +85 °C
Produkta apraksts
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.