STMicroelectronics L298N, Stepper Motor Driver IC, 46 V 4A 15-Pin, MULTIWATT V
Tehniskie dokumenti
Specifikācija
Brand
STMicroelectronicsMotor Type
Stepper
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Mounting Type
Through Hole
Package Type
MULTIWATT V
Pin Count
15
Maximum Operating Supply Voltage
46 V
Minimum Operating Supply Voltage
4.8 V
Minimum Operating Temperature
-25 °C
Height
10.7mm
Dimensions
19.6 x 5 x 10.7mm
Maximum Operating Temperature
+130 °C
Length
19.6mm
Width
5mm
Produkta apraksts
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 10,20
Katrs (Tubina ir 25) (bez PVN)
€ 12,342
Katrs (Tubina ir 25) (Ieskaitot PVN)
25
€ 10,20
Katrs (Tubina ir 25) (bez PVN)
€ 12,342
Katrs (Tubina ir 25) (Ieskaitot PVN)
25
Pirkt iepakojumos
| Daudzums | Vienības cena | Per Penālis |
|---|---|---|
| 25 - 100 | € 10,20 | € 255,00 |
| 125 - 225 | € 9,60 | € 240,00 |
| 250 - 600 | € 9,10 | € 227,50 |
| 625 - 1225 | € 8,60 | € 215,00 |
| 1250+ | € 8,20 | € 205,00 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Tehniskie dokumenti
Specifikācija
Brand
STMicroelectronicsMotor Type
Stepper
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Mounting Type
Through Hole
Package Type
MULTIWATT V
Pin Count
15
Maximum Operating Supply Voltage
46 V
Minimum Operating Supply Voltage
4.8 V
Minimum Operating Temperature
-25 °C
Height
10.7mm
Dimensions
19.6 x 5 x 10.7mm
Maximum Operating Temperature
+130 °C
Length
19.6mm
Width
5mm
Produkta apraksts
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products