RS PRO Nickel Plated Brass Full Bore, 2 Way, Ball Valve, BSP 3/4in, 16bar Operating Pressure
Tehniskie dokumenti
Specifikācija
Brand
RS ProType
Full Bore, 2 Way
Ball Material
Chrome Plated Brass
Attachment Type
Threaded
Thread Standard
BSP
Thread Size
3/4in
Body Material
Nickel Plated Brass
Pipe Diameter
20mm
Handle Type
Lever
Handle Material
Steel
Handle Colour
Red
Operating Pressure
16bar
Izcelsmes valsts
Italy
Produkta apraksts
S.81 Side Drain Brass Ball Valve - 1/4 Turn
Warning
Freezing of the fluid in the installation may severely damage the valve
Approvals
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile O rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 18,60
Katrs (bez PVN)
€ 22,51
Katrs (Ieskaitot PVN)
1
€ 18,60
Katrs (bez PVN)
€ 22,51
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Brand
RS ProType
Full Bore, 2 Way
Ball Material
Chrome Plated Brass
Attachment Type
Threaded
Thread Standard
BSP
Thread Size
3/4in
Body Material
Nickel Plated Brass
Pipe Diameter
20mm
Handle Type
Lever
Handle Material
Steel
Handle Colour
Red
Operating Pressure
16bar
Izcelsmes valsts
Italy
Produkta apraksts
S.81 Side Drain Brass Ball Valve - 1/4 Turn
Warning
Freezing of the fluid in the installation may severely damage the valve
Approvals
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile O rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.