RS PRO 1μF Aluminium Electrolytic Capacitor 100V dc, Radial, Through Hole

RS noliktavas nr.: 711-1671Ražotājs: RS PROIMPA: 0
brand-logo
View all in Alumīnija kondensatori

Tehniskie dokumenti

Specifikācija

Polarised

Polar

Dimensions (L x W x H)

94 x 94 x45mm

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+105°C

Leakage Current

<=0.01 CV or 3 μA @ 1 min

Lead Pitch

2mm

Diameter

5mm

USB Version

USB2.0

Lifetime

1000h

Capacitance

1µF

Tolerance

±20%

Dissipation Factor

10%

Voltage

100V dc

Length

11mm

Height

11mm

Series

RS

Dimensions

5 (Dia.) x 11mm

Ripple Current

15mA

Brand

RS Pro

Izcelsmes valsts

Taiwan, Province Of China

Produkta apraksts

Corintech FilesThruTheAir WiFi-Alert Monitoring System

The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.

Supplied with

Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger

Standards

IEEE 802.11

Noliktavas stāvoklis patreiz nav pieejams

Lūdzu pārbaudiet vēlreiz vēlāk

Noliktavas stāvoklis patreiz nav pieejams

€ 0,106

Katrs (Paka ir 100) (bez PVN)

€ 0,128

Katrs (Paka ir 100) (Ieskaitot PVN)

RS PRO 1μF Aluminium Electrolytic Capacitor 100V dc, Radial, Through Hole
Izvēlēties iepakojuma veidu

€ 0,106

Katrs (Paka ir 100) (bez PVN)

€ 0,128

Katrs (Paka ir 100) (Ieskaitot PVN)

RS PRO 1μF Aluminium Electrolytic Capacitor 100V dc, Radial, Through Hole
Noliktavas stāvoklis patreiz nav pieejams
Izvēlēties iepakojuma veidu

Pirkt iepakojumos

DaudzumsVienības cenaPer Iepakojums
100 - 400€ 0,106€ 10,60
500 - 900€ 0,098€ 9,80
1000 - 2400€ 0,09€ 9,00
2500+€ 0,086€ 8,60

Tehniskie dokumenti

Specifikācija

Polarised

Polar

Dimensions (L x W x H)

94 x 94 x45mm

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+105°C

Leakage Current

<=0.01 CV or 3 μA @ 1 min

Lead Pitch

2mm

Diameter

5mm

USB Version

USB2.0

Lifetime

1000h

Capacitance

1µF

Tolerance

±20%

Dissipation Factor

10%

Voltage

100V dc

Length

11mm

Height

11mm

Series

RS

Dimensions

5 (Dia.) x 11mm

Ripple Current

15mA

Brand

RS Pro

Izcelsmes valsts

Taiwan, Province Of China

Produkta apraksts

Corintech FilesThruTheAir WiFi-Alert Monitoring System

The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.

Supplied with

Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger

Standards

IEEE 802.11