Parker Double, CETOP Mounting Hydraulic Check Valve, ZRE-AB02-D1, 120L/min, 2bar Cracking Pressure
Tehniskie dokumenti
Specifikācija
Brand
ParkerCracking Pressure
2bar
Maximum Flow Rate
120L/min
Manufacturer Series
ZRE
CETOP Mounting
CETOP 5
Single/Double
Double
Maximum Operating Pressure
315 bar
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
PRICED TO CLEAR
Yes
Produkta apraksts
CETOP 05 Pilot Operated Check Valves
A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 05 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows flow at the outlet. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).
Check Valves
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 311,00
Katrs (bez PVN)
€ 376,31
Katrs (Ieskaitot PVN)
1
€ 311,00
Katrs (bez PVN)
€ 376,31
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Brand
ParkerCracking Pressure
2bar
Maximum Flow Rate
120L/min
Manufacturer Series
ZRE
CETOP Mounting
CETOP 5
Single/Double
Double
Maximum Operating Pressure
315 bar
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
PRICED TO CLEAR
Yes
Produkta apraksts
CETOP 05 Pilot Operated Check Valves
A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 05 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows flow at the outlet. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).
Check Valves
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.