Allen Bradley Guardmaster Safety Relay
Tehniskie dokumenti
Specifikācija
Supply Voltage
24V ac/dc
Safety Contacts
1NO
Housing Material
Polycarbonate
Actuator Type
Magnetic
Auxiliary Contacts
NC
Sensor Principle
Magnetic
Actuator Included
No
Range
Sipha
Series
440N
IP Rating
IP67
Depth
99mm
Width
22.5mm
Length
82mm
Safety Category
ANSI B11.19, AS4024.1, CE, cULus, E N1088, EN 954-1, IEC 60947-5-1, IEC/EN 60204-1, ISO 13849-1, ISO 14119, NFPA 79, Sipha 1/2 Category 3 EN954-1, TUV
Width
22.5mm
Izcelsmes valsts
Dominican Republic
Produkta apraksts
Allen-Bradley Sipha S2 Non-contact Safety Switch
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Supplied with
Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 331,00
Katrs (bez PVN)
€ 400,51
Katrs (Ieskaitot PVN)
1
€ 331,00
Katrs (bez PVN)
€ 400,51
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Supply Voltage
24V ac/dc
Safety Contacts
1NO
Housing Material
Polycarbonate
Actuator Type
Magnetic
Auxiliary Contacts
NC
Sensor Principle
Magnetic
Actuator Included
No
Range
Sipha
Series
440N
IP Rating
IP67
Depth
99mm
Width
22.5mm
Length
82mm
Safety Category
ANSI B11.19, AS4024.1, CE, cULus, E N1088, EN 954-1, IEC 60947-5-1, IEC/EN 60204-1, ISO 13849-1, ISO 14119, NFPA 79, Sipha 1/2 Category 3 EN954-1, TUV
Width
22.5mm
Izcelsmes valsts
Dominican Republic
Produkta apraksts
Allen-Bradley Sipha S2 Non-contact Safety Switch
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Supplied with
Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.