Tehniskie dokumenti
Specifikācija
Brand
Aim-TTiSeries
MX
Model Number
MX180TP
Number of Outputs
3
Calibrated
UKAS
Output Voltage
0 → 15 V, 0 → 30 V, 0 → 60 V, 0 → 60V
Supply Voltage
110 → 240V ac
Output Current
0 → 3 A, 0 →6 A, 0 →12 A, 0 →20A
Power Rating
378W
Number of Displays
3
Bench Power Supply Type
Triple Output DC Power Supply
Type
Digital
Digital/Analogue
Digital
Output Connector
Binding Post Terminal
Input Connector
IEC 320
Maximum Temperature
+40°C
Minimum Temperature
+5°C
Izcelsmes valsts
United Kingdom
Produkta apraksts
Aim-TTi MX180T & MX180TP Triple Output Power Supplies
The MX180T ( 895-2491 ) has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. The MX180TP ( 895-2495 ) incorporates USB, RS232 and LXI compliant LAN interfaces. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.
The Aim-TTi MX series provides impressive power density by combining high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A. When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output.
For an optional GPIB module see stock number 144-5481.
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 1 810,00
Katrs (bez PVN)
€ 2 190,10
Katrs (Ieskaitot PVN)
1
€ 1 810,00
Katrs (bez PVN)
€ 2 190,10
Katrs (Ieskaitot PVN)
1
Tehniskie dokumenti
Specifikācija
Brand
Aim-TTiSeries
MX
Model Number
MX180TP
Number of Outputs
3
Calibrated
UKAS
Output Voltage
0 → 15 V, 0 → 30 V, 0 → 60 V, 0 → 60V
Supply Voltage
110 → 240V ac
Output Current
0 → 3 A, 0 →6 A, 0 →12 A, 0 →20A
Power Rating
378W
Number of Displays
3
Bench Power Supply Type
Triple Output DC Power Supply
Type
Digital
Digital/Analogue
Digital
Output Connector
Binding Post Terminal
Input Connector
IEC 320
Maximum Temperature
+40°C
Minimum Temperature
+5°C
Izcelsmes valsts
United Kingdom
Produkta apraksts
Aim-TTi MX180T & MX180TP Triple Output Power Supplies
The MX180T ( 895-2491 ) has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. The MX180TP ( 895-2495 ) incorporates USB, RS232 and LXI compliant LAN interfaces. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.
The Aim-TTi MX series provides impressive power density by combining high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A. When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output.
For an optional GPIB module see stock number 144-5481.