ADAFRUIT GEMMA V2 Wearable Development Board 1222
Tehniskie dokumenti
Specifikācija
Brand
ADAFRUIT INDUSTRIESClassification
Development Board
Kit Name
GEMMA V2
Technology
Wearable
Processor Part Number
ATtiny85
Processor Type
MCU
Distrelec Product Id
30091135
Produkta apraksts
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.
Adafruit GEMMA Wearable Platform
Noliktavas stāvoklis patreiz nav pieejams
Lūdzu pārbaudiet vēlreiz vēlāk
€ 11,70
€ 11,70 Katrs (bez PVN)
€ 14,16
€ 14,16 Katrs (Ieskaitot PVN)
1
€ 11,70
€ 11,70 Katrs (bez PVN)
€ 14,16
€ 14,16 Katrs (Ieskaitot PVN)
1
Pirkt iepakojumos
| Daudzums | Vienības cena |
|---|---|
| 1 - 4 | € 11,70 |
| 5 - 9 | € 10,50 |
| 10+ | € 9,10 |
Tehniskie dokumenti
Specifikācija
Brand
ADAFRUIT INDUSTRIESClassification
Development Board
Kit Name
GEMMA V2
Technology
Wearable
Processor Part Number
ATtiny85
Processor Type
MCU
Distrelec Product Id
30091135
Produkta apraksts
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.
Adafruit GEMMA Wearable Platform